Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Manuel d'utilisateur Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 80
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
26
Press
Menu
Press Digit
Select Key
Press Value Select
Key
_InPut
(continued)
_0-360. Span from 0° to 360°. Select for phase
angles centered around 180° (Item #1).
PHASE
Phase angle modes
Extended
_-180+. Span from -180° to +180°. Select for phase
angles centered around 0° (Item #1).
duty_C
Duty cycle mode
Ext.
A_to_b On or Off period of square waves as a
percentage of total period (Item #1).
SEtuP
Setup
_00000 Stored totals 0 Zero totals at power-on.
1 Restore totals at power-on.
_00000 Leading zeros 0 Blank leading zeros.
1 Display leading zeros.
_00000 Scaling method 1
0 Input scale factor 1 and offset 1.
1 Use coordinates of 2 points method.
_00000 Scaling method 2
0 Input scale factor 2 and offset 2.
1 Use coordinates of 2 points method.
_00000
Operation of rear connec-
tor control inputs 1 & 2.
True = 0V or tied to
digital ground).
False = 5V or open).
0 1 = Meter Reset*, 2 = Function Reset*
1 1 = Meter Reset*, 2 = Meter Hold*
2 1 = Meter Reset*, 2 = Peak or Valley Display*
3 1 = Meter Reset*, 2 = External Gate*
4 1 = Function Reset*, 2 = Meter Hold*
5 1 = Valley Only Display**, 2=Peak Only Display**
6 1 = Function Reset*, 2 = External Gate*
7 1 = Meter Hold**, Peak or Valley Display**
8 1 = Reset Total A**, 2 = Reset Total B**
9 1 = Force Alarm1, 2 = Force Alarm2
A 1 = Meter Reset*, 2 = Display Blank*
B 1 = Function Reset*, 2 = Display Blank*
C 1 = Meter Hold*, 2 = Display Blank*
D 1 = Peak or Valley Display**, 2 = Display Blank**
E 1 = Display Blank, 2 = External Gate*
F 1 = Display Item #2, 2 = Display Item #3
With 1 and 2 at 5V or open, Display Item #1.
-------------------------------------------------------------------
* 1 & 2 both at 0V = Meter Reset (can restore
totals).
** 1 & 2 both at 0V for selections 5, 7, 8, D =
Function Reset* (erases all totals).
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

Commentaires sur ces manuels

Pas de commentaire