Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Manuel d'utilisateur télécharger pdf (Page 66)

17. EXCITATION OUTPUT & POWER SUPPLY

Three isolated transducer excitation output levels are available from the power supply

board. These are selectable via jumpers b, c, d, e, f in the upper right of the board, as

illustrated. In addition, the board provides three jumper positions for special features. The

same jumper locations apply to the universal power supply (85-264 Vac or 90-300 Vdc) and

to the low voltage power supply (12-32 Vac or 10-48 Vdc).

1. Letters indicate jumper position. Jumpers are installed on pins adjacent to letters.

Excitation output Jumper locations

5 Vdc ±5%, 100 mA max

10 Vdc ±5%, 120 mA max

24 Vdc ±5%, 50 mA max

b, d, e

b, d, f

2. SELECTION OF OTHER JUMPERS

Jumper a - Front panel menu lockout, locked when installed. See Section 9.

Jumper g - Provides +5V power output at P1-4 when installed.

Jumper h - Connects "Digital Input B" to P1-4 when installed.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 79 80

Pas de commentaire

Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Manuel d'utilisateur Page 66